Shenzhen Sanray Technology Co., Ltd.
Making things smart The most professional UHF RFID manufacturer
Add to Cart
impinj R2000 long range rfid reader module available for embedded in handheld terminal
Description
M2210 UHF RFID Reader module is a high-performance reader/writer module, which is designed for high challenging RFID application environment. It employs the newest R2000 RF chip; it provides the customers unprecedented performance of reading and writing experience.
Specifications
| NO. | Name | Parameters |
| 1 | Working Voltage | DC 3.7~5V |
| 2 | Working Current | 1.5A |
| 3 | Standby Current | ≤50mA |
| 4 | Sleep Current | ≤1mA |
| 5 | Working Temperature | -25~+65℃ |
| 6 | Working Humidity | ≤95%(+25℃) |
| 7 | Storage Temperature | -40~+80℃ |
| 8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| 9 | Working Frequency | 840~960 MHz |
| 10 | Supporting Working Areas | China 1,China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan,Korea, Malaysia,Taiwan |
| 11 | RF IC | Impinj R2000 |
| 12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
| 13 | Output Power Flatness | ±0.2dBm |
| 14 | Receiving Sensitivity | -82dBm |
| 15 | RF Port Standing Wave | ≤1.5 |
| 16 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
| 17 | Multi-tag Reading | ≥400 tags/s |
| 18 | Antenna Interface Amount | one(MMCX) |
| 19 | Interface Communication Rate | 115200bps |
| 20 | Working Temprature Detection | support |
| 21 | Intensive Read/Write Mode DRM | support |
| 22 | Antenna Connection Protection | support |
| 23 | RSSI | support |
| 24 | LED | Red light (power indicator ) |
| 25 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
| 26 | Dimension | 56.5*36.0*7.8 MM |
Tag Protocol: EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Interface Definition of Single Port UHF RFID Reader Module M2210
| PIN | Interface signals |
| 1 | VCC |
| 2 | VCC |
| 3 | GND |
| 4 | GND |
| 5 | EN |
| 6 | WIEGEND1 |
| 7 | WIEGEND2 |
| 8 | GPIO3 |
| 9 | UART_RX |
| 10 | UART_TX |
| 11 | USB_D+ |
| 12 | USB_D- |
Picture of M2210 RFID Module:
Advantages
1. Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity.
2. Remarkable performance with 6dbi RF antenna, can achieve a reading distance over 8m per single tag.
3. Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
4. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
5. The tag reading is more accurate and the reading scope wider.
7. The smallest module volume in the same field and supply power of 3.7V, it is especially suitable for handsets and other mobile devices.
8. Enhance noise suppression for reliable data capture.
Remark:
The M2210 module developed a corresponding development board kit, coupled with the rapid technology of ultra-high frequency demonstration software DEMO, customers can easily and quickly familiar with the use of M2210 module, and related hardware and software development, shorten the development cycle.
The M2210 development board has a wealth of peripheral interfaces: RS-232, RS485, USB, network interface, wireless WIFI, Wiegand. Customers can choose according to the actual use of the situation.
Development board kit includes: M2210 + development board 1 set, 12V power adapter 1, 1 interface cable. Development board size: 22.0 × 12.0 × 3.5CM.
Note: Development board related configuration to be purchased separately.
Picture of develop board as below:
Application:
impinj R2000 long range rfid reader module available for embedded in handheld terminal
1. warehousing
2. logistics
3. production line management
The impinj R2000 module can be installed in the handheld terminal to realize the data collection.
A: NO , you need buy sample
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 1 years warranty to our products.
Feel free to contact us via Skype: aimeerfid , or send us an enquiry via here or by email:
aimee@sanray.cn