Add to Cart
840-860Mhz uhf rfid reader module can be used in access control
Description
M2210 UHF RFID Reader module is designed for high challenging RFID application environment. It employs the newest R2000 RF chip,it has been tested for non-stop running, and results showed that our module can work ceaselessly for 180 days. The stability and reliability can perfectly meet our customers’ application requirements.
Specifications
NO. | Name | Parameters |
1 | Working Voltage | DC 3.7~5V |
2 | Working Current | 1.5A |
3 | Standby Current | ≤50mA |
4 | Sleep Current | ≤1mA |
5 | Working Temperature | -25~+65℃ |
6 | Working Humidity | ≤95%(+25℃) |
7 | Storage Temperature | -40~+80℃ |
8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
9 | Working Frequency | 840~960 MHz |
10 | Supporting Working Areas | China 1,China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan,Korea, Malaysia,Taiwan |
11 | RF IC | Impinj R2000 |
12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
13 | Output Power Flatness | ±0.2dBm |
14 | Receiving Sensitivity | -82dBm |
15 | RF Port Standing Wave | ≤1.5 |
16 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
17 | Multi-tag Reading | ≥400 tags/s |
18 | Antenna Interface Amount | one(MMCX) |
19 | Interface Communication Rate | 115200bps |
20 | Working Temprature Detection | support |
21 | Intensive Read/Write Mode DRM | support |
22 | Antenna Connection Protection | support |
23 | RSSI | support |
24 | LED | Red light (power indicator ) |
25 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
26 | Dimension | 56.5*36.0*7.8 MM |
Tag Protocol: EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Interface Definition of Single Port UHF RFID Reader Module M2210
PIN | Interface signals |
1 | VCC |
2 | VCC |
3 | GND |
4 | GND |
5 | EN |
6 | WIEGEND1 |
7 | WIEGEND2 |
8 | GPIO3 |
9 | UART_RX |
10 | UART_TX |
11 | USB_D+ |
12 | USB_D- |
Picture of M2210 RFID Module:
Remark:
The M2210 module developed a corresponding development board kit, it has a wealth of peripheral interfaces: RS-232, RS485, USB, network interface, wireless WIFI, Wiegand. Customers can choose according to the actual use of the situation.
Development board kit includes: M2210 + development board 1 set, 12V power adapter 1, 1 interface cable. Development board size: 22.0 × 12.0 × 3.5CM.
Note: Development board related configuration to be purchased separately.
Picture of develop board as below:
Application:
1.warehousing,
2.logistics
3.production line management, etc..
4.access control
It's available for handheld reader:
Advantages
1. Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity.
2. Remarkable performance with 6dbi RF antenna, can achieve a reading distance over 8m per single tag.
3. Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
4. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
5. The tag reading is more accurate and the reading scope wider.
7. The smallest module volume in the same field and supply power of 3.7V, it is especially suitable for handsets and other mobile devices.
8. Enhance noise suppression for reliable data capture.
Feel free to contact us via Skype: aimeerfid , or send us an enquiry via here or by email:
aimee@sanray.cn